Catalyst 9200 Power Redundancy

[janiax]

Hello,

I cannot find anywhere at what power redundancy mode does C9200-L operate.
Is it in the combined mode, so if one of the PSUs fail, the switch continues working, since the second PSU keeps supplying the switch with power or is one active and the other PSU standby?

Thank you.

[Jaderson Pessoa]

Hello,

On datasheet are indicating that there is two supply fixed for redudancy.
https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9200-series-switches/nb-06-cat9200-ser-data-sheet-cte-en.html