04-21-2019 07:14 AM
Hello Community,
when attempting to enable the guestshell as indicated here:
i receive the following error:
#guestshell enable
Interface will be selected if configured in app-hosting
Please wait for completion
% Error: No interface configuration for guestshell
Question: is there a way to access the guestshell on catalyst 9300?
thanks.
Regan
Below is the application hosted on the catalyst 9300
C9300#show app-hosting detail
App id :<app_id>
Owner : ioxui
State : DEPLOYED
Application
Type : lxc
Name : GuestShell
Version : 2.5.1
Description : Cisco Systems Guest Shell XE for x86_64
Path : /guestshell/:guestshell.tar
Activated profile name : custom
Resource reservation
Memory : 256 MB
Disk : 1 MB
CPU : 800 units
Attached devices
Type Name Alias
---------------------------------------------
Network interfaces
---------------------------------------
Port forwarding
Table-entry Service Source-port Destination-port
---------------------------------------------------
App id : <app_id>
Owner : ioxui
State : RUNNING
Application
Type : vm
Name : Attivo Network
Version : 3.0-4.0.4.119
Description : Threat Defence
Path :
Activated profile name : custom
Resource reservation
Memory : 512 MB
Disk : 10 MB
CPU : 2000 units
Attached devices
Type Name Alias
---------------------------------------------
serial/shell iox_console_shell serial0
serial/aux iox_console_aux serial1
serial/syslog iox_syslog serial2
serial/trace iox_trace serial3
Network interfaces
---------------------------------------
eth0:
MAC address : 52:54:dd:4:eb:20
eth1:
MAC address : 52:54:dd:2f:32:52
04-21-2019 10:15 AM
You need to enable Guest shell with Interface. ( once that is enabled then you can access as usal ssh)
Device# guestshell enable VirtualPortGroup 0 guest-ip 192.168.35.2
gateway 192.168.35.1 netmask 255.255.255.0 name-server 10.1.1.1
05-16-2020 01:27 PM - edited 05-16-2020 01:32 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide