Catalyst C9500 RJ 45 support

[hamadalsser222]

I want to confirm if the cisco Catalyst C9500-48Y4C can support the Connector Type Copper Rj 45 such as SFP-10G-T-X (100M/1000M/10G bps) ?

This because I have some servers with Rj 45 ports and my local supplier proposed me 9200 series  additional to the 9500 and said its that 9500 not support Rj 45 ports connection !

[Kasun Bandara]

C9500-48Y4C is directly not support RJ45 copper termination. you need to use copper SFP like GLC-TE for 1G and SFP-10G-T-X  for 10G. 9200 can connect with copper cables if you select required model.

[MHM Cisco World]

he already mention he have SFP-10G-T-X so I think Yes it support RJ45. 

Q.  What devices does the SFP-10G-T-X interoperate with on the other side of the link?

A.  The SFP-10G-T-X interoperates with any device that supports 10GBASE-T, 1000BASE-T, or 100BASE-TX standards (such as IEEE 802.3an, 802.3ab, 802.3u). The SFP-10G-T-X interoperates with other BASE-T transceivers with (RJ-45 ports) as well as embedded BASE-T ports on servers and switches that comply to the IEEE standards described above.

https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/transceiver-modules/q-and-a-c67-743938.html

[navneet-k1]

C9500-24Y4C: Cisco Catalyst 9500 Series high-performance switch with 24x 1/10/25G Gigabit Ethernet + 4x 40/100G Uplink. - Does this Switch support SFP-10G-T-X ? & What is the NM type we can use in the uplink port.

[MHM Cisco World]

..

[MHM Cisco World]

..

[navneet-k1]

What is your final say. Does C9500 support RJ45 SFP or not. If yes which SFP model has to be used.