CBS250-8T-D-NA replacement qualification for SG250-08-K9-NA

[nishika]

Hi All,

I am sitting remotely and qualifying CBS250-8T-D-NA instead of SG250-08-K9-NA.

Can somebody share pictures of new CBS switch from backside showing power port.

Does new switch will require new software configuration 

[marce1000]

       >...Does new switch will require new software configuration 
  - Depends , check device firmware version and compare with : https://www.cisco.com/c/en/us/support/switches/business-250-series-smart-switches/series.html#~tab-downloads

    Note that you also have online emulators available : https://community.cisco.com/t5/online-device-emulators-small-business/bd-p/911-discussions-online-device-emulators , 
                      https://www.cisco.com/web/fw/tools/cisco-business/emulators/switch/cbs/cbs250/cbs250-8fp/html/cbs/config/log_off_page.html?moduleType=2138
      Sometimes that can be useful when trying out configurations (and or possibilities)  , 

 M.

[nishika]

Can somebody share picture of comparison between power connectors on backside

[nishika]

need help from you all on giving power connector picture

[nishika]

Can somebody upload pic of the same