Hello,
We had a CBS350-48T-4X successfully stacked with a CBS350-24XS. The CBS350-24XS was the primary unit and the CBS350-48T-4X Unit ID After Reset was Set to "Auto". I then changed the CBS350-48T-4X Unit ID After Reset to "2" and hit apply and reboot. The CBS350-48T-4X is now repeatedly rebooting and displaying the text below when I console in. Is it possible the mfr.bin file got corrupted and I need to use Xmodem to recover it?
Running UBOOT...
U-Boot 2013.01 (Mar 23 2023 - 11:35:45) Version: armada-17.06.6 V3.2.1.22
NAND ID = 0xDA01
NAND Model = Cypress/Spansion 2Gb 8bit S34ML02G2
CBS350-48T-4X
FPGA Version: 24.02
Loading file 'mfg.bin' to addr 0x02000000 with size 14216570 (0x00d8ed7a)...
Done
image_size 14216570
Error: Failed to find valid secure header in MFG image
Failed to read secure MFG Header
Verify Secure MFG failed
resetting ...
BootROM 1.41
Booting from NAND flash
General initialization - Version: 1.0.0
Serdes initialization - Version: 1.0.2
mvCtrlPexPolaritySet: TWSI Write skipped, leaving PEX polarity in EP mode
** Link is Gen1, check the EP capability
PEX: pexIdx 0, Link upgraded to Gen2 based on client capabilities
DDR3 Training Sequence - Ver TIP-1.56.0
mvSysEnvGetTopologyUpdateInfo: skipped Twsi read to enable DDR ECC update
DDR3 Training Sequence - Switching XBAR Window to FastPath Window
Updated Physical Mem size is from 0x20000000 to 10000000
DDR3 Training Sequence - Ended Successfully
BootROM: Image checksum verification PASSED
CBS ROS Booton: Aug 14 2020 19:28:46 ver 3.1.1
Press x to choose XMODEM...
Booting from NAND flash
Running UBOOT...
U-Boot 2013.01 (Mar 23 2023 - 11:35:45) Version: armada-17.06.6 V3.2.1.22
