Hello,
1) change your network cable
2) check you pc doesnt have static ip addressing asigned
3) disable your sofware Fw on the PC
4) power on switch
5) When the post has completed and the SYSTEM LED is solid green,Press the SETUP button
6)When you press the SETUP button, a switch port LED begins blinking green.
7)Connect the network cable to switch and pc
8)When the SETUP LED turns green, start a internet browser session on the PC
http://www.cisco.com/en/US/docs/switches/lan/catalystexpress500/release_12.2_25_fy/quick/start/1708402.html
res
Paul
Please don't forget to rate this post if it has been helpful.
Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.
Kind Regards
Paul