Ce520 - voice vlan problem with smart port

[philippe.cousineau]

*note ; C520 is all webgui ( no CLI here )

I have reset the configuration of the c520.

After the configuration the vlan 100 was still there.

I configure a vlan 2 name = Cisco-Voice

I want to configure my ports for voice and default vlan access. I have 2 vlan ( 1 = data , 2 = voice ).

now If I use the smart ports wizzard and Choose the 'ip phone + desktop '  It choose vlan 1 for data and vlan 100 for voice.

I can use the drop down menu to change vlan 1 but I can't change the voice vlan, that is my big problem.

At this point, my desktop work but not my phone.

Anyone can help me on that ?

[Arthur Kant]

The CE520 can be configured using the "web" cli. Going this route may help you to your end goal. http://ipaddress/exec

Sent from Cisco Technical Support iPhone App

[philippe.cousineau]

It was the only switch that I had this problem, other where fine.

I saw some people having the same issue on the net.  If you guys have that problem.

Download a copy of a working config, with a tftp server upload it to the startup config on your switch that have the problem.

it save a lot of time