09-13-2012 02:20 PM - edited 03-07-2019 08:52 AM
Hi.
I need to upgrade the IOS and therefore change the flashcard on a router 2811.
What is the procedure to change the flash (64MB to 256MB) on a 2811 router?
I can remove the flashcard when the router has already started, change the flashcard and load the new IOS?
Thanks
09-13-2012 04:18 PM
Hi,
Yes, after the router boots completely, you can take out the flash card, replace it with a new one, load the IOS from the TFTP server into the new flash card and reboot the router.
HTH
09-13-2012 11:22 PM
Hi Reza.
Thanks for the information.
09-18-2012 05:32 AM
Hello Reza
I already change the flash without any problem.
I put a 512 Mb flash (according to cisco documentation is 256 Mb max) and it worked perfectly.
.
Thank you very much.
I
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide