Change MTU Switch 2960x

[jewfcb001]

I would like to change MTU on my switch . but I found in documentation for procedure need to reload. 

I would like to make sure change MTU on switch 2960x Version 15.2 must reload switch or not 

Please suggest me. 

[omz]

Hi 

are you changing the system mtu?

yes you have to reload for the change to take effect.

use show system mtu before and after you apply the change. 

hope this helps 

[jewfcb001]

Hi omz, 

are you changing the system mtu?

- Yes, I want to change mtu . but  for procedure I confuse  after configure must reload swtich or not . 

[Seb Rupik · Accepted solution]

Hi there,

The platform configuration guide states you must reload after changing the system MTU:

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-2_4_e/configurationguide/b_1524e_consolidated_2960x_cg/b_1524e_consolidated_2960x_cg_chapter_0111110.html

cheers,

Seb.

[omz · Accepted solution]

yes you need to reload