10-10-2011 05:11 AM - edited 03-07-2019 02:42 AM
Hello,
i am trying to port channel a server on the nexus 2k (connected back through nexus 7k - straight topoly - with jsut 1 link)
and i get the following error
Int port-channel102/1/1
Channel-group 5
channel-group not supported for interface type
we are running nexus 5.1.3 kickstart image and 5.1.3 system image. Epld imjage is 5.1.1
any thoughts on this please ? is vpc needed for the above ?
Thanks
Solved! Go to Solution.
10-10-2011 07:06 AM
10-10-2011 05:20 AM
refer to a previous CSC post
10-10-2011 05:45 AM
Thanks Andrew for the link. So does the 5.2.1 version definetly support end host port channelling ? has anyone tried this ? just need this doing asap as our datacenter needs to be live in a couple of days. Thanks
10-10-2011 05:51 AM
Specifically
Cisco NX-OS Release 5.2(1) adds support for new features to Cisco Nexus Fabric Extender (FEX) modules.
This functionality enables a FEX port to be configured as a routed port. However, no routing protocols can be tied to this routed interface.
The host vPC with FEX feature provides the ability to have a vPC from a host connected to two independent Cisco Nexus 2000 Series Fabric Extenders with a Cisco Nexus 7000 Series switch that acts as a parent switch to the FEX. The two Cisco Nexus 7000 Series switches that act as the parent switch form the vPC peers. The connectivity between the FEX and Cisco Nexus 7000 Series switch cannot be a vPC. It can be a link or a port channel.
10-10-2011 07:02 AM
10-10-2011 07:06 AM
Yes - that looks OK to me.
See the below guide
HTH>
10-10-2011 07:10 AM
Thanks ANdrew. i will try this
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide