05-08-2024 01:31 AM - edited 05-08-2024 01:32 AM
I am experiencing high cpu usage on one of my 4500x switches. Below is the output
switch#show processes cpu sorted
Core 0: CPU utilization for five seconds: 37%; one minute: 32%; five minutes: 29%
Core 1: CPU utilization for five seconds: 19%; one minute: 22%; five minutes: 26%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
5135 1647513 22275264 154 28.33 26.89 27.34 0 iosd
4812 2501757 91355633 74 0.04 0.01 0.03 0 system_mgr
5081 2148608 29370608 36 0.04 0.04 0.01 0 plogd
switch#Show Platform Health
%CPU %CPU RunTimeMax Priority Average %CPU Total
Target Actual Target Actual Fg Bg 5Sec Min Hour CPU
RkiosObflMan 0.50 0.00 4 3 100 500 0 0 0 33:11
VSI slot-01 6.00 31.07 6 15 100 500 43 39 42 108012:32
VSI backplane 6.00 0.01 6 4 100 500 0 0 0 172:32
GalChassisVp 3.00 0.10 20 6 100 500 0 0 0 601:48
S2w-JobEventSchedule 10.00 0.00 10 0 100 500 0 0 0 0:00
Stub-JobEventSchedul 10.00 0.00 10 0 100 500 0 0 0 0:00
Lj-poll 1.00 0.02 2 3 100 500 0 0 0 166:34
StatValueMan Update 1.00 0.00 1 4 100 500 0 0 0 165:06
As you can see the VSI slot-01 is using 31.07%. Does anyone has an idea since my other switches have the same config and IOS but none is experiencing this problem
05-08-2024 01:39 AM
M.
05-08-2024 01:52 AM
I have read it but nowhere it is mentioned high cpu usage on VSI
05-08-2024 01:50 AM
What firmware is the switch on?
What is the uptime?
Is this in a VSS?
05-08-2024 01:54 AM
What firmware is the switch on?
Software (cat4500e-UNIVERSALK9-M), Version 03.11.03a.E
What is the uptime?
1 year, 23 weeks, 2 days, 18 hours, 47 minutes
Is this in a VSS?
no
05-08-2024 03:18 AM
32% is not something I'd be worried about.
05-08-2024 03:31 AM
The total load of the cpu is 54%. The average cpu load on the other switches is 7%. I dont see a reason for the cpu to be that high
Below is the output from another 4500x switch with the same firmware
switch1#sh proc cpu sorted
Core 0: CPU utilization for five seconds: 4%; one minute: 4%; five minutes: 3%
Core 1: CPU utilization for five seconds: 0%; one minute: 4%; five minutes: 4%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
5113 339015 17556591 250 2.80 3.93 3.67 0 iosd
4359 2918459 25588846 4310 0.08 0.08 0.08 0 sh
5066 3702941 13020888 160 0.04 0.03 0.04 0 mem_mgmt
switch1#Show Platform Health
%CPU %CPU RunTimeMax Priority Average %CPU Total
Target Actual Target Actual Fg Bg 5Sec Min Hour CPU
RkiosObflMan 0.50 0.00 4 1 100 500 0 0 0 47:21
VSI slot-01 6.00 2.26 6 13 100 500 0 1 0 9599:27
VSI backplane 6.00 0.01 6 4 100 500 0 0 0 246:25
05-08-2024 03:37 PM
I've got several chassis of 4500R+E with Sup7 on IOS-XE version 3.8.10 and my values are very low.
The uptime of the chassis are >32 weeks.
05-08-2024 03:28 AM
Hello,
are there any remnants of a previous VSS configuration in the running config ? E.g.:
switch virtual domain <domain-id>
virtual switch
stackwise-virtual
?
05-08-2024 03:40 AM
No.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide