Cisco 1300-8fp-2g

[jerry2025]

Hi,

Is the cisco Cisco SFP-10G-T compatible with the 1300-8fp-2g?

Thank you!

[jerry2025]

i wanted to add that the media switches from copper to fiber when ethernet cable is inserted.

Cisco1300#20-Feb-2025 17:07:19 %LINK-W-Down: gi9
20-Feb-2025 17:07:19 %LINK-W-Down: Vlan 1
20-Feb-2025 17:07:23 %LINK-I-CHNGCOMBOMEDIA: Media changed from copper media to fiber media on port gi9.

[Flavio Miranda]

@jerry2025 

 As per the data sheet, this switch is not Ten Giga. 

C1300-8FP-2G

10 x Gigabit Ethernet

8 x Gigabit Ethernet

2 x Gigabit Ethernet combo

C1300-8FP-2G

C1300-8FP-2G

●  8x 10/100/1000 PoE+ ports with 120W power budget ●  2x Gigabit copper/SFP combo ports ●  Rack-mountable

[Leo Laohoo]

1300-8FP-2G will not support 10 Gbps optics.

[vishalbhandari]

@jerry2025 No, the Cisco SFP-10G-T (10GBASE-T) module is not compatible with the CBS1300-8FP-2G switch. The CBS1300-8FP-2G has two SFP uplink ports, but these ports only support 1G SFP modules, not 10G SFP+ modules. If you need a copper uplink, you should use a 1G copper SFP instead, like the GLC-T module.

[M02@rt37 · Accepted solution]

hello @jerry2025 

Please refer here:

https://tmgmatrix.cisco.com/?npid=6098

no 10Giga !!!