05-20-2014 04:59 AM - edited 03-07-2019 07:28 PM
I am working with a customer with a Cisco 1941 Router, we have internet traffic, but we cannot get their email or http traffic through to their servers.
gis server - 67.231.65.229 needs to be accessible from www
email server - 67.231.65.227 needs inbound and outbound email traffic
datatest server - 67.231.65.230
TVC_TOS#sh run
Building configuration...
Current configuration : 1877 bytes
!
! Last configuration change at 21:18:51 UTC Mon May 19 2014 by tsummers
! NVRAM config last updated at 21:05:06 UTC Mon May 19 2014
! NVRAM config last updated at 21:05:06 UTC Mon May 19 2014
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname TVC_TOS
!
boot-start-marker
boot-end-marker
!
!
enable password 7 XXXXXXXXXXXXXXXXX
!
no aaa new-model
!
ip cef
!
!
!
!
!
!
ip domain name tvcconnect.net
ip name-server 64.72.64.10
ip name-server 8.8.8.8
no ipv6 cef
multilink bundle-name authenticated
!
!
!
license udi pid CISCO1941/K9 sn FGL172021GD
!
!
username cisco privilege 15 password 7 XXXXXXXXXXXXXXXXXX
username tsummers privilege 15 password 7 XXXXXXXXXXXXXXXXXXXX
!
!
!
!
!
!
interface Embedded-Service-Engine0/0
no ip address
shutdown
!
interface GigabitEthernet0/0
description To TOS Firewall
ip address 67.231.65.236 255.255.255.240
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
!
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface GigabitEthernet0/0/0
description TVC to TOS Interfeace
ip address 67.231.65.98 255.255.255.252
ip nat outside
ip virtual-reassembly in
rate-limit output 10000000 1875000 38750000 conform-action transmit exceed-action drop
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip nat inside source list 1 interface GigabitEthernet0/0/0 overload
ip route 0.0.0.0 0.0.0.0 67.231.65.97
!
access-list 10 permit any
!
!
!
control-plane
!
!
05-20-2014 11:34 AM
You need to use PAT to forward the respective traffic to the servers.
Martin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide