11-21-2014 08:45 PM - edited 03-07-2019 09:37 PM
I'm trying to open a port in a Cisco 2801, the port 3001 to give internet access for a cisco switch which IP is 172.16.8.40
thanks in advance
cisco 2801 config
match access-group 110
class-map type inspect match-all vpn-traffic
match access-group 111
!
!
policy-map type inspect priv-pub-pmap
class type inspect all-private
inspect
class class-default
drop
policy-map type inspect pub-priv-pmap
class type inspect vpn-traffic
inspect
class class-default
drop
!
zone security private
zone security public
zone-pair security priv-pub source private destination public
service-policy type inspect priv-pub-pmap
zone-pair security pub-priv source public destination private
service-policy type inspect pub-priv-pmap
!
!
crypto isakmp policy 1
encr aes 256
authentication pre-share
group 2
lifetime 84600
!
crypto isakmp policy 5
encr 3des
hash md5
authentication pre-share
group 2
lifetime 84600
!
crypto isakmp client configuration group BFvpn
key vPnBr1TT@ny9687!
dns 192.168.2.10
pool vpn_ip
acl remotevpn
!
!
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set aes-256-sha esp-aes 256 esp-sha-hmac
!
crypto dynamic-map vpn 65535
set transform-set ESP-3DES-MD5
!
!
crypto map vpn client authentication list AAA-VPN
crypto map vpn isakmp authorization list AAA-VPN
crypto map vpn client configuration address respond
crypto map vpn 65535 ipsec-isakmp dynamic vpn
!
!
!
!
!
interface FastEthernet0/0
ip address 75.150.67.105 255.255.255.252
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly in
zone-member security public
duplex auto
speed auto
crypto map vpn
!
interface FastEthernet0/1
ip address 172.16.250.1 255.255.255.252
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
ip virtual-reassembly in
zone-member security private
speed 100
full-duplex
!
interface FastEthernet0/3/0
switchport mode trunk
no ip address
!
interface FastEthernet0/3/1
no ip address
!
interface FastEthernet0/3/2
no ip address
!
interface FastEthernet0/3/3
no ip address
!
interface Vlan1
no ip address
!
interface Vlan413
ip address 170.163.128.202 255.255.255.252
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly in
zone-member security public
!
!
router eigrp 1
network 172.16.0.0
!
ip local policy route-map LocalPBR
ip local pool vpn_ip 172.16.251.10 172.16.251.20
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip nat inside source static tcp 172.16.8.40 3001 172.16.250.1 3001
ip nat inside source route-map NAT-HFC interface FastEthernet0/0 overload
ip nat inside source route-map NAT-OPT interface Vlan413 overload
ip route 0.0.0.0 0.0.0.0 75.150.67.106 track 3
ip route 0.0.0.0 0.0.0.0 170.163.128.201 5
!
ip access-list standard remotevpn
permit 172.16.0.0 0.15.255.255
!
ip sla 1
icmp-echo 75.150.67.106 source-interface FastEthernet0/0
frequency 30
ip sla schedule 1 life forever start-time now
ip sla 2
icmp-echo 170.163.128.201 source-interface Vlan413
frequency 30
ip sla schedule 2 life forever start-time now
access-list 1 permit 170.163.0.0 0.0.255.255
access-list 1 remark for Telnet & SNMP Restrictions
access-list 1 permit 172.16.8.0 0.0.3.255
access-list 7 permit 172.16.8.40
access-list 7 permit 172.16.8.41
access-list 7 permit 172.16.8.42
access-list 7 permit 172.16.8.43
access-list 10 permit 75.150.67.105
access-list 20 permit 170.163.128.202
access-list 102 deny ip any 10.0.0.0 0.255.255.255
access-list 102 deny ip any 172.16.0.0 0.15.255.255
access-list 102 deny ip any 192.168.0.0 0.0.255.255
access-list 102 permit ip 172.16.0.0 0.0.15.255 any
access-list 102 permit ip 172.16.0.0 0.15.255.255 any
access-list 110 permit ip any any
access-list 111 permit ip 172.16.251.0 0.0.0.255 172.16.0.0 0.15.255.255
access-list 111 deny ip any any
!
!
!
route-map LocalPBR permit 10
match ip address 10
set ip default next-hop 75.150.67.106
!
route-map LocalPBR permit 20
match ip address 20
set ip default next-hop 170.163.128.201
!
route-map NAT-HFC permit 10
match ip address 102
match interface FastEthernet0/0
!
route-map NAT-OPT permit 10
match ip address 102
match interface Vlan413
!
snmp-server community chimenet#3000 RO 1
snmp-server enable traps tty
!
tacacs-server host 170.163.248.63
tacacs-server host 170.163.248.64
tacacs-server directed-request
tacacs-server key 7 06050728414B071C1154405B5C54
11-25-2014 02:20 AM
Hello Jherrera,
Trust you are doing great.
Could you please additionally configure "ip nat outside" under interface Fastethernet 0/1 and "ip nat inside" under interface vlan 413 and interface fa 0/0 and check if the its working.
Regards,
Mohit
**Please rate if you find this post helpfull
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide