06-08-2018 02:17 AM - edited 03-08-2019 03:18 PM
Hello,
I have a Cisco Catalyst 2960 PoE-24 switch. None of the ports is working or blinking. I tried restart.
The following LEDs are on:
SYST (flashing)
RPS (stable)
STAT (stable)
DUPLX (stable)
SPEED (stable)
POE (stable)
The console output upon booting:
Using driver version 1 for media type 1 Base ethernet MAC Address: 00:24:98:2c:c9:00 Xmodem file system is available. The password-recovery mechanism is enabled. Initializing Flash... mifs[2]: 0 files, 1 directories mifs[2]: Total bytes : 3870720 mifs[2]: Bytes used : 1024 mifs[2]: Bytes available : 3869696 mifs[2]: mifs fsck took 0 seconds. mifs[3]: 528 files, 19 directories mifs[3]: Total bytes : 27998208 mifs[3]: Bytes used : 10041344 mifs[3]: Bytes available : 17956864 mifs[3]: mifs fsck took 6 seconds. ...done Initializing Flash. done. Loading "flash:c2960-lanbase-mz.122-44.SE3/c2960-lanbase-mz.122-44.SE3.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ File "flash:c2960-lanbase-mz.122-44.SE3/c2960-lanbase-mz.122-44.SE3.bin" uncompressed and installed, entry point: 0x3000 executing... Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(44)SE3, RELEASE SOFTWARE (fc2) Copyright (c) 1986-2008 by Cisco Systems, Inc. Compiled Sun 28-Sep-08 21:15 by nachen Image text-base: 0x00003000, data-base: 0x01000000 Initializing flashfs... Using driver version 1 for media type 1 mifs[3]: 0 files, 1 directories mifs[3]: Total bytes : 3870720 mifs[3]: Bytes used : 1024 mifs[3]: Bytes available : 3869696 mifs[3]: mifs fsck took 0 seconds. mifs[3]: Initialization complete. mifs[4]: 528 files, 19 directories mifs[4]: Total bytes : 27998208 mifs[4]: Bytes used : 10041344 mifs[4]: Bytes available : 17956864 mifs[4]: mifs fsck took 1 seconds. mifs[4]: Initialization complete. ...done Initializing flashfs. POST: CPU MIC register Tests : Begin POST: CPU MIC register Tests : End, Status Passed POST: PortASIC Memory Tests : Begin POST: PortASIC Memory Tests : End, Status Passed POST: CPU MIC interface Loopback Tests : Begin POST: CPU MIC interface Loopback Tests : End, Status Passed POST: PortASIC RingLoopback Tests : Begin POST: PortASIC RingLoopback Tests : End, Status Passed front_end/ (directory) extracting front_end/fe_type_3 (75656 bytes) extracting front_end/front_end_ucode_info (129 bytes) extracting front_end/fe_type_4 (75656 bytes) extracting ucode_info (76 bytes) POST: Inline Power Controller Tests : Begin POST: inline power post failed for port 0 POST: inline power post failed for port 1 POST: inline power post failed for port 2 POST: inline power post failed for port 3 POST: inline power post failed for port 4 POST: inline power post failed for port 5 POST: inline power post failed for port 6 POST: inline power post failed for port 7 POST: inline power post failed for port 8 POST: inline power post failed for port 9 POST: inline power post failed for port 10 POST: inline power post failed for port 11
06-08-2018 02:44 AM
09-30-2020 09:02 AM
Hello Bro
the You find a solution for this problem please let me know
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide