Cisco 2960 traceroute vrf is not accessible

[adventurer]

Hi Guys,

Does this look like a bug with traceroute on newer IOS ? I'm quite sure this command has worked in older IOS.

Switch Ports Model              SW Version            SW Image
------ ----- -----              ----------            ----------
*    1 26    WS-C2960-24TC-S    15.0(1)SE1            C2960-LANLITEK9-M

A01#traceroute 10.246.0.2

% VRF  is not accessible

A01#traceroute
Protocol [ip]:
% VRF  is not accessible

A01#ping 10.246.0.2

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.246.0.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 167/172/177 ms
A01#

[acampbell]

Hi,

Can you try using this command

A01#traceroute ip 10.246.0.2

Does this work ?

Regards,
Alex.
Please rate useful posts.

[adventurer]

I have logged this with TAC. It's a bug CSCtq75383