01-31-2013 03:37 PM - edited 03-07-2019 11:26 AM
Hi Guys,
Does this look like a bug with traceroute on newer IOS ? I'm quite sure this command has worked in older IOS.
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 26 WS-C2960-24TC-S 15.0(1)SE1 C2960-LANLITEK9-M
A01#traceroute 10.246.0.2
% VRF is not accessible
A01#traceroute
Protocol [ip]:
% VRF is not accessible
A01#ping 10.246.0.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.246.0.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 167/172/177 ms
A01#
01-31-2013 04:45 PM
Hi,
Can you try using this command
A01#traceroute ip 10.246.0.2
Does this work ?
Regards,
Alex.
Please rate useful posts.
01-31-2013 08:26 PM
I have logged this with TAC. It's a bug CSCtq75383
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide