cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
523
Views
0
Helpful
1
Replies

Cisco 3508G XL

miguel.tome
Level 1
Level 1

Hi

I have a problem with a catalyst 3508G XL ...

The problem is as follows:

When I power on the system LED keeps blinking and does nothing.

I've tried connecting the cable to the console port, but can not communicate.

Someone can help me?

1 Reply 1

mvknl
Level 1
Level 1

Did you check the terminal settings you use? They should be as follows:

Bits per sec    :  9600 
Data bits       :     8 
Parity          :  none 
Stop bits       :     1 
Flow control    :  none

If they are correct you should at least see some output while booting.