Cisco 3560x Port-Channel

[johnlloyd_13]

hi,

i got a 3560x and was wondering if it's possible to bundle/etherchannel one of its default or 'native' gig port (g0/x) to a port in a daughter card (g1/x - using copper SFP)?

or should it be the same, i.e. etherchannel a native g0/1 to another g0/2 or on the daughter card g1/1 and g1/2.,

NAME: "FRULink Slot 1 - FRULink Module", DESCR: "FRULink 1G Module"
PID: C3KX-NM-1G , VID: V01 , SN: FDO1712xxxx

NAME: "GigabitEthernet1/1", DESCR: "10/100/1000BaseTX SFP"
PID: Unspecified , VID: , SN: P1Cxxxx

<SNIP>

[Reza Sharifi]

Hi John,

As long as both ports have the same speed and duplex that should not be an issue. Basically, one port is copper, and the other copper SFP. Just make sure the copper SFP uses the same duplex as the native copper port.

HTH