We have a Cisco 3650-24PS-S switch and the switch is functioning fine. However when I run a show environment all command on the Switch I see the following error. However the FAN PS-1 is OK.
Switch 1 FAN 1 is NOT PRESENT or FAULTY
Switch 1 FAN 2 is NOT PRESENT or FAULTY
Switch 1 FAN 3 is NOT PRESENT or FAULTY
I am not able to understand if this is some kind of cosmetic bug for the switch. The switch is currently working on 03.07.05E IOS which is a stable version.
Below are the command output of show environment all and show log of the switch
Switch 1 FAN 1 is NOT PRESENT or FAULTY
Switch 1 FAN 2 is NOT PRESENT or FAULTY
Switch 1 FAN 3 is NOT PRESENT or FAULTY
FAN PS-1 is OK
FAN PS-2 is NOT PRESENT
Switch 1: SYSTEM TEMPERATURE is OK
SW PID Serial# Status Sys Pwr PoE Pwr Watts
-- ------------------ ---------- --------------- ------- ------- -----
1A PWR-C2-640WAC OK Good Good 640
1B Not Present
Show log after reboot has following errors:
%PLATFORM_THERMAL-6-FRU_FAN_OIR: Switch 1: System fan 2 inserted
Jun 8 00:39:44.793: %PLATFORM_THERMAL-1-FRU_FAN_FAILURE: Switch 1: System fan 2 failed
Jun 8 00:39:46.799: %PLATFORM_THERMAL-6-FRU_FAN_OIR: Switch 1: System fan 2 removed
Jun 8 00:39:46.800: %PLATFORM_THERMAL-1-FRU_FAN_NOT_PRESENT: Switch 1: System fan 2 not present
%PLATFORM_THERMAL-6-FRU_FAN_OIR: Switch 1: System fan 1 inserted
Jun 8 00:40:56.404: %PLATFORM_THERMAL-1-FRU_FAN_FAILURE: Switch 1: System fan 1 failed
Jun 8 00:40:58.410: %PLATFORM_THERMAL-6-FRU_FAN_OIR: Switch 1: System fan 1 removed
Jun 8 00:40:58.410: %PLATFORM_THERMAL-1-FRU_FAN_NOT_PRESENT: Switch 1: System fan 1 not present
Jun 8 00:41:00.414: %PLATFORM_THERMAL-6-FRU_FAN_OIR: Switch 1: System fan 3 inserted
Jun 8 00:41:00.414: %PLATFORM_THERMAL-1-FRU_FAN_FAILURE: Switch 1: System fan 3 failed
Jun 8 00:41:01.992: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/19: Power granted
Jun 8 00:41:02.419: %PLATFORM_THERMAL-6-FRU_FAN_OIR: Switch 1: System fan 3 removed
Jun 8 00:41:02.419: %PLATFORM_THERMAL-1-FRU_FAN_NOT_PRESENT: Switch 1: System fan 3 not present
Can anyone suggest on what could be the issue?
Why am I getting such logs and the FAN error on the Switch?
