Cisco 3650 Switch Time Synchronization with Local NTP Server

[CSCO12094806]

Hi we are trying to synchronize Cisco 3650 Switch (two switches in stack) time with our local NTP Servers (ip: 192.168.100.10, 192.168.200.10) to maintain accurate time. Local NTP servers are already synchronized time from internet.

Cisco 3650 switches running with Denali 16.3.6 Software.

please share reference article or commands for the same

Thanks.

Regards

ASAMEDT

[Leo Laohoo]

ntp serv 192.168.100.10
ntp serv 192.168.200.10

[Julio E. Moisa · Accepted solution]

Hi

ntp server 192.168.100.10 primary

ntp server 192.168.200.10

It should be enough but if you use authentication there are additional steps. The following link could be also useful. 

http://packetlife.net/blog/2011/mar/28/cisco-ios-clocks-and-ntp/

Hope it is useful

:-)