I've got a 3745 and it would seem that any L3 vlan created has a max speed of 100Mbps, I can create subifs but that's not ideal in my situation.
Is there a way around this or... is that just a limitation of the platform?
Cisco IOS Software, 3700 Software (C3745-ADVENTERPRISEK9-M), Version 12.4(12), RELEASE SOFTWARE (fc1)
Cisco 3745 (R7000) processor (revision 2.0) with 497664K/20480K bytes of memory.
Processor board ID JMX0743L4HG
R7000 CPU at 350MHz, Implementation 39, Rev 3.3, 256KB L2, 2048KB L3 Cache
#show int vlan 254
Vlan254 is up, line protocol is up
Hardware is EtherSVI, address is 000d.bcdc.d350 (bia 000d.bcdc.d350)
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,