cisco 3750x PBR is not working

[aslam.bajwa]

Hello Experts.

i am trying to configure PBR on cisco 3750x switch , route-map commands are there but ip policy route-map command is unavailable on both interfaces (SVI & Gig int). i also reload the switch after sdm prefer routing command.

IOS Image : c3750e-universalk9-mz.122-55.SE5.bin

=============================================================

BECAWireless-CoreSW#sh sdm prefer routing
 "desktop routing" template:
 The selected template optimizes the resources in
 the switch to support this level of features for
 8 routed interfaces and 1024 VLANs.

  number of unicast mac addresses:                  3K
  number of IPv4 IGMP groups + multicast routes:    1K
  number of IPv4 unicast routes:                    11K
    number of directly-connected IPv4 hosts:        3K
    number of indirect IPv4 routes:                 8K
  number of IPv4 policy based routing aces:         0.5K
  number of IPv4/MAC qos aces:                      0.5K
  number of IPv4/MAC security aces:                 1K

========================================================================

BECAWireless-CoreSW#show sdm prefer "desktop routing" template:
                                    ^
% Invalid input detected at '^' marker.

[Reza Sharifi]

Hi,

What is your license level? You need "IP Services" license to be able to do PBR.

Sh ver or sh license will show you that.

HTH

[aslam.bajwa]

Hi ,

below is the show lic info

CoreSW#sh license
Index 1 Feature: ipservices
        Period left: 8  weeks 4  days
        License Type: Evaluation
        License State: Active, Not in Use, EULA not accepted
        License Priority: None
        License Count: Non-Counted

Index 2 Feature: ipbase
        Period left: Life time
        License Type: Permanent
        License State: Active, In Use
        License Priority: Medium
        License Count: Non-Counted

Index 3 Feature: lanbase
        Period left: 0  minute  0  second