Cisco 3850 and HP DL360 10Gbe SFP+

[campbellkay]

Hi Guys,

Anyone have any experience connecting a Cisco 3850 with the 10GB module C3850-NM-2-10G to an

HP DL 360 Gen9  

727060-B21 HPE FlexFabric 10Gb 2P 556FLR-SFP+ Adapter (FlexLOM)

i was looking at using the cisco DAC cables, instead of separate transceivers, does this work, if any have done it before?

Thanks,

[Mark Malone]

Hi

this is what 3850s support i would use something thats under supported range , if you use something unsupported Cisco will not assist if there is an issue

http://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/10GE_Tx_Matrix.html

Catalyst 3850 Series
Network Device	Transceiver Model	Minimum Software Release Required
		DOM Support	Software Release
WS-C3850-24T WS-C3850-24P WS-C3850-48T WS-C3850-48P WS-C3850-48F (With C3850-NM-2-10G or C3850-NM-4-10G uplink modules)	SFP-H10GB-CU1M SFP-H10GB-CU3M SFP-H10GB-CU5M	—	XE 3.2.0SE
	SFP-10G-SR SFP-10G-LRM SFP-10G-LR SFP-10G-ER SFP-10G-SR-S SFP-10G-LR-S SFP-10G-ER-S	XE 3.2.0SE	XE 3.2.0SE
	SFP-10G-ZR SFP-10G-ZR-S DWDM SFP+	XE 3.3.3SE	XE 3.3.3SE
	CWDM SFP+	XE 3.7.0	XE 3.7.0
	SFP-H10GB-CU1-5M SFP-H10GB-CU2M SFP-H10GB-CU2-5M SFP-H10GB-ACU7M SFP-H10GB-ACU10M SFP-10G-AOC1M SFP-10G-AOC2M SFP-10G-AOC3M SFP-10G-AOC5M SFP-10G-AOC7M SFP-10G-AOC10M	—	XE 3.6.0E
	SFP-10G-BXD-I SFP-10G-BXU-I SFP-10G-BX40D-I SFP-10G-BX40U-I	XE 3.7.1E	XE 3.7.1E
WS-C3850-12XS WS-C3850-16XS WS-C3850-24XS WS-C3850-32XS (C3850-NM-8-10G uplink modules)	SFP-10G-SR SFP-10G-LRM SFP-10G-LR SFP-10G-ER SFP-10G-ZR SFP-10G-SR-S SFP-10G-LR-S SFP-10G-ER-S SFP-10G-ZR-S DWDM SFP+ CWDM SFP+ SFP-H10GB-CU1M SFP-H10GB-CU1-5M SFP-H10GB-CU2M SFP-H10GB-CU2-5M SFP-H10GB-CU3M SFP-H10GB-CU5M SFP-H10GB-ACU7M SFP-H10GB-ACU10M SFP-10G-AOC1M SFP-10G-AOC2M SFP-10G-AOC3M SFP-10G-AOC5M SFP-10G-AOC7M SFP-10G-AOC10M SFP-10G-BXD-I SFP-10G-BXU-I SFP-10G-BX40D-I SFP-10G-BX40U-I	XE 3.7.1E	XE 3.7.1E
WS-C3850-48XS-S WS-C3850-48XS-E WS-C3850-48XS-F-S WS-C3850-48XS-F-E WS-C3850-48XS	SFP-10G-SR SFP-10G-LRM SFP-10G-LR SFP-10G-ER SFP-10G-ZR SFP-10G-SR-S SFP-10G-LR-S SFP-10G-ER-S SFP-10G-ZR-S DWDM SFP+ CWDM SFP+ SFP-H10GB-CU1M SFP-H10GB-CU1-5M SFP-H10GB-CU2M SFP-H10GB-CU2-5M SFP-H10GB-CU3M SFP-H10GB-CU5M SFP-H10GB-ACU7M SFP-H10GB-ACU10M SFP-10G-AOC1M SFP-10G-AOC2M SFP-10G-AOC3M SFP-10G-AOC5M SFP-10G-AOC7M SFP-10G-AOC10M SFP-10G-BXD-I SFP-10G-BXU-I SFP-10G-BX40D-I SFP-10G-BX40U-I	XE 3.7.2	XE 3.7.2
WS-C3850-12S WS-C3850-24S (With C3850-NM-2-10G or C3850-NM-4-10G or C3850-NM-8-10G uplink modules)	SFP-H10GB-CU1M SFP-H10GB-CU3M SFP-H10GB-CU5M	—	XE 3.3.3SE
	SFP-10G-SR SFP-10G-LRM SFP-10G-LR SFP-10G-ER SFP-10G-ZR SFP-10G-SR-S SFP-10G-LR-S SFP-10G-ER-S SFP-10G-ZR-S DWDM SFP+	XE 3.3.3SE	XE 3.3.3SE
	CWDM SFP+	XE 3.7.0	XE 3.7.0
	SFP-H10GB-CU1-5M SFP-H10GB-CU2M SFP-H10GB-CU2-5M SFP-H10GB-ACU7M SFP-H10GB-ACU10M SFP-10G-AOC1M SFP-10G-AOC2M SFP-10G-AOC3M SFP-10G-AOC5M SFP-10G-AOC7M SFP-10G-AOC10M	—	XE 3.6.0E
	SFP-10G-BXD-I SFP-10G-BXU-I SFP-10G-BX40D-I SFP-10G-BX40U-I	XE 3.7.1E	XE 3.7.1E

[campbellkay]

Yeah that plan was to use

SFP-H10GB-CU1M

just wasnt sure if it would work on the HP end.

Thanks,