cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
777
Views
0
Helpful
1
Replies
Highlighted
Beginner

Cisco 3850 stacking H/w Version mismatch

I have a failed cisco 3850. I got a new switch in and the IOS was lower than my current stack so i upgraded it . When i do a show ver the IOS looks right but when i do a show switch the H/W version are different.  This will cause my stack to fail ? 

New switch :
 
Switch Ports Model              SW Version        SW Image              Mode
------ ----- -----              ----------        ----------            ----
*    1 56    WS-C3850-48P       03.07.03E         cat3k_caa-universalk9 INSTALL
                                                                 
                                                                 H/W   Current
Switch#   Role    Mac Address     Priority Version  State
------------------------------------------------------------
*1       Active                                     15           V04     Ready
Old Switch :
Switch Ports Model              SW Version        SW Image              Mode
------ ----- -----              ----------        ----------            ----
*    1 56    WS-C3850-48P       03.07.03E         cat3k_caa-universalk9 INSTALL
S
                                                                  H/W   Current
Switch#   Role    Mac Address     Priority Version  State
------------------------------------------------------------
*1       Active                                      15     V06     Ready
1 REPLY 1
Beginner

Re: Cisco 3850 stacking H/w Version mismatch

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards