02-14-2014 10:41 AM - edited 03-07-2019 06:12 PM
Hi ,
how can i enable and config BFD on the Cisco 3850 .
i had check eigrp plugin but It have not BFD Platform Support .
Core_IDC3850#sh eigrp plugins
EIGRP feature plugins:::
eigrp-release : 7.00.00 : Portable EIGRP Release
: 1.00.13 : Source Component Release(rel7)
parser : 2.02.00 : EIGRP Parser Support
igrp2 : 3.00.00 : Reliable Transport/Dual Database
external-client : 1.02.00 : Service Distribution Client Support
eigrp-nsf : 2.00.00 : Platform Support
Spatial Reuse Prot : 1.01.00 : Platform Support
mtr : 1.00.01 : Multi-Topology Routing(MTR)
EVN/vNets : 1.00.00 : Easy Virtual Network (EVN/vNets)
ipv4-af : 2.01.01 : Routing Protocol Support
ipv4-sf : 1.02.00 : Service Distribution Support
ipv6-af : 2.01.01 : Routing Protocol Support
ipv6-sf : 2.01.00 : Service Distribution Support
vNets-parse : 1.00.00 : EIGRP vNets Parse Support
snmp-agent : 1.01.01 : SNMP/SNMPv2 Agent Support
Core_IDC3850#
My 3850 OS ver
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 32 WS-C3850-24T 03.03.01SE cat3k_caa-universalk9 INSTALL
Br
Horace
Solved! Go to Solution.
02-14-2014 01:12 PM
As per the Cisco Feature Navigator output, this switch model does not support BFD.
Herewith attached the supported feature of this switch model 3.3.1 software version.
HTH
Rasika
**** Pls rate all useful responses ****
02-14-2014 01:12 PM
02-16-2014 07:53 PM
Hi Rasika
Thanks.
Regards,
Horace
02-16-2014 07:59 PM
Hi Horace,
If that answer your query pls mark this thread as answered.
Regards
Rasika
02-28-2018 02:41 PM
Starting from Cisco IOS XE Denali 16.3.1 the BFD is supported.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide