Cisco 4500 Telecom certification

[adnankhancisco]

Hi Experts, 

One of the customer is asking that why Cisco's 4500 has following certification if this switch doesn't support digital interface like E1/T1

Any advice please?

elecom (E1)	●  CTR 12/13 ●  CTR 4 ●  ACA TS016
Telecom (T1)	●  FCC Part 68 ●  Canada CS-03 ●  JATE Green Book

[Mark Malone]

They used to support them in AGM modules there now eol and the 6500 and 3700 router were the migration path for it after 2009

http://www.cisco.com/en/US/products/hw/switches/ps663/products_data_sheet09186a008033a388.html

[adnankhancisco]

So why is it still mentioned in today's datasheet?

[Mark Malone]

can you provide the document so I can see what it saying

[adnankhancisco]

Below is the link, under Table 9.       Regulatory Standards Compliance

http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/product_data_sheet0900aecd801792b1.html

[Mark Malone]

That's not a specific reference to one 4500 model its all of them and its regarding compliance not that they actually currently support E1 T1 ports/blades , its just saying that the switch is complaint with current regulations for that standard service which is not just bound to Cisco devices its an open standard and the switch is compliant if required for it