hello, i am new to the 6500 installation and a bit confused at the moment with all the PFC and DFC cards.
I have one chasis with 6509 with the new VS-SUP2T-10G, once i am starting the switch below error message is coming:
%OIR-6-DOWNGRADE_EARL: Module 5 PFC installed is not identical to system PFC and will perform at current system operating mode.
i am not sure why they are not compatible and why this error message is coming ?
below is the show inventory on my 6500:
new#show inventory
NAME: "WS-C6509-E", DESCR: "Cisco Systems, Inc. Catalyst 6500 9-slot Chassis System"
PID: WS-C6509-E , VID: V06,
NAME: "WS-C6K-VTT-E 1", DESCR: "VTT-E FRU 1"
PID: WS-C6K-VTT-E , VID: ,
NAME: "WS-C6K-VTT-E 2", DESCR: "VTT-E FRU 2"
PID: WS-C6K-VTT-E , VID: ,
NAME: "WS-C6K-VTT-E 3", DESCR: "VTT-E FRU 3"
PID: WS-C6K-VTT-E , VID: ,
NAME: "CLK-7600 1", DESCR: "OSR-7600 Clock FRU 1"
PID: CLK-7600 , VID: ,
NAME: "CLK-7600 2", DESCR: "OSR-7600 Clock FRU 2"
PID: CLK-7600 , VID: ,
NAME: "1", DESCR: "WS-X6748-GE-TX CEF720 48 port 10/100/1000mb Ethernet Rev. 4.3"
PID: WS-X6748-GE-TX , VID: V06,
NAME: "WS-F6700-CFC Centralized Forwarding Card EARL sub-module of 1", DESCR: "WS-F6700-CFC Centralized Forwarding Card Rev. 4.1"
PID: WS-F6700-CFC , VID: V06,
NAME: "2", DESCR: "WS-X6848-SFP CEF720 48 port 1000mb SFP Rev. 3.0"
PID: WS-X6848-SFP , VID: V02,
NAME: "WS-F6K-DFC4-A Distributed Forwarding Card 4 EARL sub-module of 2", DESCR: "WS-F6K-DFC4-A Distributed Forwarding Card 4 Rev. 2.0"
PID: WS-F6K-DFC4-A , VID: V05,
NAME: "5", DESCR: "VS-SUP2T-10G 5 ports Supervisor Engine 2T 10GE w/ CTS Rev. 1.5"
PID: VS-SUP2T-10G , VID: V05,
NAME: "msfc sub-module of 5", DESCR: "VS-F6K-MSFC5 CPU Daughterboard Rev. 2.1"
PID: VS-F6K-MSFC5 , VID: ,
NAME: "VS-F6K-PFC4XL Policy Feature Card 4 EARL sub-module of 5", DESCR: "VS-F6K-PFC4XL Policy Feature Card 4 Rev. 2.1"
PID: VS-F6K-PFC4XL , VID: V02, SN:
NAME: "6", DESCR: "WS-SVC-FWM-1 6 ports Firewall Module Rev. 4.5"
PID: WS-SVC-FWM-1 , VID: ,
NAME: "WS-C6509-E-FAN 1", DESCR: "Enhanced 9-slot Fan Tray 1"
PID: WS-C6509-E-FAN , VID: V05,
NAME: "PS 1 WS-CAC-3000W", DESCR: "AC power supply, 3000 watt 1"
PID: WS-CAC-3000W , VID: V03,
NAME: "PS 2 WS-CAC-3000W", DESCR: "AC power supply, 3000 watt 2"
PID: WS-CAC-3000W , VID: V03,
Let me know what i am missing ???
