Helloo All, i have configured power saving on my CME. so the phones turn off screen after working hours. once the screen is off if someone calls on the extension the phone rings and the red light on handset and button is also blinking but the screen remains off and you cannot see the calling name and number. is this normal behavior for CME ? I have 7945, 7965 and 6945 phones on the network.   Regards Muhammad    ... View more

Hello All, i have configured Moh under telephony services and it is working fine for the calls coming from PSTN network. But for internal calls it is not working. Need help, as if we need to configure moh muticast to work for internal calls. ... View more

Hello All, we just recieved the CP-7945 phones. one of the phone on connecting is trying to upgrade the firmware. the current firmware on the phone is 9-3-1. the latest which i can download from cisco website is 9-2-1 which will not work in my case.   so i need your suggestions for this issue. ... View more

I need to generate a CSR request to obtain a 3rd party certificate for my WLC. i am not sure how i can do that. all document availble are for wlc 4400. let me know if the same process will apply to wlc5760 as well. ... View more

Hello All, i have to upgrade my CUCME from 7.1 to 8.6 but once i reboot the router no phone is getting registered to the new CUCME. All phones are getting registration rejected and a below log message is coming on the console:   %IPPHONE-6-REG_ALARM: 24: Name=SEPXXXXXXXXXXXX Load= SCCP11.8-5-2S Last=Phone-Reg-Rej   i am not sure what i am missing here.   ... View more

I have installed custom web pages with our company logo on the autentication pages.  everything is fine, users are able to access the pages and autenticate but the logo image is not showing. instead of the logo *some text missing * is appearing on the webpage. my logo file is .gif having a size of 211KB.   ... View more

I need to configure NLB on N5K. as per cisco doc i am doing below configuration: interface Vlan10   no shutdown   ip address 10.1.2.1/24   ip arp 10.1.2.200 03bf.0000.1111 mac address-table multicast 03bf.0000.1111 vlan 10 interface po 11   i am not able to enter below commands: vlan configuration 10   layer-2 multicast lookup mac   will appreciate if someone will help in this context. i ... View more

I have two 6500-E chassis with SUP2T on them. one of the chassis is having the latest WS-X6848-SFP while the other one is having WS-X6748-SFP. both the line cards are having the same WS-F6K-DFC4-A.   if i will configure VSS between these chassis, will there be any issues ?     ... View more

i am navigating to configuration -> wireless and then clicking on ALL APS but the page is showing some of the aps. I have a total of 200 APS but only 20 or so are been displayed here. how can i get the information of all the aps registered with my controller. ... View more