cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1170
Views
0
Helpful
1
Replies

Cisco 6500vss high cpu utilization process 'ios-base'

vaib7av.shirkul
Level 1
Level 1

Hi All,  we are using Cisco 6509-E VSS mode [12.2(33)SXI] ipbase image and facing high cpu utilization. In show process cpu output it is showing some "ios-base" process consuming cpu.  I attached show cpu output, thanks in advance,

1 Reply 1

Reza Sharifi
Hall of Fame
Hall of Fame

Your CPU ranges from 20 to 34%, which is not very unusual for 6500 with VSS. Also, if you are running a modular code, the CPU utilization is usually higher than with non-modular code.

HTH