Solved: cisco 6807 Core Switch upgrade

Mohammed Al-odhari · ‎04-01-2015

Hi all

am having core swtich 6807 with below ios

System image file is "bootdisk:s2t54-ipbasek9-mz.SPA.151-2.SY1.bin"

I need to upgrade it to s2t54-adventerprisek9-mz.SPA.151-2.SY2.bin.

1- Can i upgrade it normally using tftp server (copy tftp flash:bootdisk) <-- is this directory correct?

2- and then issue the command boot system flash bootdisk:s2t54-adventerprisek9-mz.SPA.151-2.SY2.bin

OR there is something relate to FPD image or any thing else ???

Please feedback and correct me with steps above if available.

regards,

Leo Laohoo · ‎04-01-2015

2- and then issue the command boot system flash bootdisk:s2t54-adventerprisek9-mz.SPA.151-2.SY2.bin

Yes.

1- Can i upgrade it normally using tftp server (copy tftp flash:bootdisk) <-- is this directory correct?

Yes. You can also copy the IOS via USB.

But most importantly, please check the config-registry value. If you want to take advantage of the boot variable string then the config-registry value should be "0x2102".

View solution in original post

Leo Laohoo · ‎04-01-2015

2- and then issue the command boot system flash bootdisk:s2t54-adventerprisek9-mz.SPA.151-2.SY2.bin

Yes.

1- Can i upgrade it normally using tftp server (copy tftp flash:bootdisk) <-- is this directory correct?

Yes. You can also copy the IOS via USB.

But most importantly, please check the config-registry value. If you want to take advantage of the boot variable string then the config-registry value should be "0x2102".