Dear All
One standby RSP720-3C-GE has been faulty So I have purchased a new card for use for standby mode but when I inserted this card is not initialized
showing unknown when I check "show module"command .
my device is - Cisco -7609
version :-
Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRC6, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Mon 08-Mar-10 09:56 by prod_rel_team
ROM: System Bootstrap, Version 12.2(33r)SRD5, RELEASE SOFTWARE (fc1)
showing log message in active RSP ( RSP720-3C-GE ) Console
*Mar 9 06:32:22.601: %OIR-SP-3-PWRCYCLE: Card in module 5, is being power-cycled (Module reset)
*Mar 9 06:32:23.713: %PFREDUN-SP-6-ACTIVE: Standby processor removed or reloaded, changing to Simplex mode
*Mar 9 06:48:54.517: %ONLINE-SP-6-TIMER: Module 5, Proc. 0. Failed to bring online because of timer event
*Mar 9 06:49:05.657: %PFREDUN-SP-6-ACTIVE: Standby processor removed or reloaded, changing to Simplex mode
*Mar 9 06:49:05.657: %OIR-SP-3-PWRCYCLE: Card in module 5, is being power-cycled (Module reset)
*Mar 9 07:05:36.482: %ONLINE-SP-6-TIMER: Module 5, Proc. 0. Failed to bring online because of timer event
*Mar 9 07:05:47.590: %PFREDUN-SP-6-ACTIVE: Standby processor removed or reloaded, changing to Simplex mode
*Mar 9 07:05:47.590: %OIR-SP-3-PWRCYCLE: Card in module 5, is being power-cycled (Module reset)
*Mar 9 07:22:18.375: %ONLINE-SP-6-TIMER: Module 5, Proc. 0. Failed to bring online because of timer event
Please suggest.
