Cisco 7606 and WS-X6748-GE-TX issue

[g.pregnolato]

I have one Cisco 7606 and i need to install a WS-X6748-GE-TX with WS-F6700-DFC3CXL.

When I install the WS-X6748-GE-TX the module is powered off with the following warning:

00:01:45: %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 1, power not allowed: Unsupported baseboard/earl combination.

The IOS release is: 12.2(18)SXF15

The "show module" command shows:

------------------ show module ------------------

Mod Ports Card Type                              Model              Serial No.

--- ----- -------------------------------------- ------------------ -----------

  1   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX     JAF1219CDKQ

  3   48  48 port 10/100 mb RJ45                 WS-X6348-RJ-45     SAL08207TE3

  4   16  SFM-capable 16 port 1000mb GBIC        WS-X6516-GBIC      SAL08496YC8

  5    2  Supervisor Engine 720 (Active)         WS-SUP720-3BXL     SAL1126SFZH

  6    2  Supervisor Engine 720 (Hot)            WS-SUP720-3B       SAL1230Y9X0

Mod MAC addresses                       Hw    Fw           Sw           Status

--- ---------------------------------- ------ ------------ ------------ -------

  1  001f.cae6.e9ac to 001f.cae6.e9db   2.8   Unknown      Unknown      PwrDown

  3  0011.210c.9fc8 to 0011.210c.9ff7   9.0   5.4(2)       8.5(0.46)RFW Ok

  4  0012.d92b.89a8 to 0012.d92b.89b7   5.7   7.2(1)       8.5(0.46)RFW Ok

  5  0016.9df7.0564 to 0016.9df7.0567   5.6   8.5(2)       12.2(18)SXF1 Ok

  6  001c.58d0.c3f0 to 001c.58d0.c3f3   5.8   8.5(4)       12.2(18)SXF1 Ok

Mod  Sub-Module                  Model              Serial       Hw     Status

---- --------------------------- ------------------ ----------- ------- -------

  1  Distributed Forwarding Card WS-F6700-DFC3CXL   SAL1213KAUJ  1.1    PwrDown

  5  Policy Feature Card 3       WS-F6K-PFC3BXL     SAL1126SV4P  1.8    Ok

  5  MSFC3 Daughterboard         WS-SUP720          SAL1126SL7G  3.1    Ok

  6  Policy Feature Card 3       WS-F6K-PFC3BXL     JAF1216AHHT  1.9    Ok

  6  MSFC3 Daughterboard         WS-SUP720          SAL1230Y30R  3.5    Ok

Mod  Online Diag Status

---- -------------------

  1  Not Applicable

  3  Pass

  4  Pass

  5  Pass

  6  Pass

Anybody knows why the combination of baseboard/earl it´s unsupported.

Thanks,

Giuseppe

[Reza Sharifi]

Hi Giuseppe,

This module is supported on the 6500 series and not 7600.

There are spesific card that are supported in both, but this is not one og them:

odules

• Cisco Catalyst 6500 Series 10 Gigabit Ethernet Interface Modules Data Sheet

• Cisco Catalyst 6500 Series Gigabit Ethernet Interface Modules Data Sheet

• Cisco Catalyst 6500 Series 10/100 and 10/100/1000 Ethernet Interface Modules Data Sheet

Layer 4-7 Modules

• Cisco Catalyst 6500 Series Communication Media Module

• Cisco Catalyst 6000 Family Voice T1 and Services Module

• Cisco Catalyst 6500 Series Cisco Content Switching Module

• Cisco Content Services Gateway

• Cisco Catalyst 6500 Series Firewall Services Module

• Cisco Catalyst 6500 Series IDS Module (IDSM-2)

• IPSec VPN Services Module for the Cisco Catalyst 6500 Switch and Cisco 7600 Router

• Cisco Multiprocessor WAN Application Mode

• Cisco Catalyst 6500 Series NAM (NAM-1/NAM-2)

• Cisco Persistent Storage Device

• SSL Services Module for the Cisco Catalyst 6500 Series and Cisco 7600 Series

• Cisco Catalyst 6500 Series Wireless LAN Services Module

FlexWAN, Optical Services Modules, and ATM

• Cisco 7600 Series and Cisco Catalyst 6500 Series Optical Services Modules

• Cisco 7600 Series and Cisco Catalyst 6500 Series Enhanced FlexWAN Module

• FlexWAN Module for the Cisco Catalyst 6500 Series and Cisco 7600 Series

• New High-Speed ATM LANE/MPOA Modules

more info:

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_data_sheet0900aecd8017376e.html

HTH