Cisco 867VAE-K9 router packet capture on the WAN port

[shilpipandya1]

I really need to capture Cisco 867 router WAN port packet capture. Please let me know how to do that?

[Mark Malone · Accepted solution]

You could try EPC if its supported , its a bit flakey on some platforms though even when configured can have issue s collecting stats

ip traffic-export is another method for routers again if supported RITE

https://supportforums.cisco.com/document/139686/configuration-example-embedded-packet-capture-cisco-ios-and-ios-xe

http://www.cisco.com/c/en/us/td/docs/ios/12_4t/12_4t11/ht_rawip.html

[shilpipandya1]

Thank You Mark for quick help, EPC worked for Cisco 867 WAN port.