In default mode the ASA 5505 is setup with two Vlan's, one inside and one outside. Vlan1 is the default inside VLan, with IP 192.168.1.1. I would like to change the subnet of Vlan1 tot 192.168.10.1, but when I do, no Ethernet port is assigned to Vlan1 anymore (was 0/1 - 0/7). What I have done is;
(config)#interface vlan 1
(config)#ip address 192.168.10.1 255.255.255.0
But after that, no Ethernet port is within Vlan1, so I tried the following to assign one (port 0/1);
(config)#switchport access vlan 1
But nothing happends when monitoring (#show run) interface 0/1 (no Vlan assigned)
Check out the below links for configuratiion in ASA 5505 ,Hope this helps out your query !!
Well, I did not solve it....The problem is when the Inside (vlan1) IP has been modified I'm no longer able to connect to the ASA using ASDM. I found on the internet that is has something to do with an DHCP Pool assigned to Vlan1, but Im unable to remove this pool, I guess as a result of leak of knowledge....
Maybe someone can help why changing the default IP of the default Vlan causes this much trouble...Thanks in advance.
Well, solved it myself!
It's kind a drastic solution, but it worked. To configure an other default IP for Vlan 1, simply restore the ASA to it factory defaults with the following parameters;
Let's say we like to set Vlan1 to subnet 192.168.10.x instead of (the default) 192.168.1.x
(config)#configure factory-default 192.168.10.1 255.255.255.0
Jobs done, happy new year...
Excellent job stendec75 , I was searching for the same issue. I used ASDM to change my Vlan1 IP, but then, after the change, I lost all access to it through ASDM. By posting your own found solution to your problem, you helped me out a ton.
The reason why u lost ASDM connection is once you change the inside ip you have to allow the same ip for
http server enable
http 192.168.x.x 255.255.255.0 inside
If u do not do this the first ip will only be allowed and with the new ip which u given will not have access.
Sent from Cisco Technical Support iPad App