Cisco AutoRP Mapping Agent filtering

[NursultanRamazanS]

Hello everybody,

Why elected RP-3 (7.7.7.7) for GDA 236.1.1.1/32, and why not RP-2 (6.6.6.6) ? Why rp-announce-filter not worked or I don't understand something ?

P.S. I configured ip pim rp-announce-filter on R8 (Mapping Agent) and deployed clear ip pim rp-mapping (for refresh).

[mlund · Accepted solution]

I think this is because 7.7.7.7 is higher number than 6.6.6.6.

[NursultanRamazanS · Accepted solution]

Hello,

I solved problem. Cause was on CSR1k software version. I reconfigured on other IOS and then working fine.