cisco c1200

[duwijakarta]

How to create SSH for Catalyst 1200-8FP-2G Smart Switch device type, I have problems when SSHing from device 1 to another device, or from the Fortigate device to the switch device, but if I SSH from a laptop there is no issue

[duwijakarta]

I just want to make sure, is it possible to only use switchport trunk mode to the fortigate HA device, but if interface 1 is down it can still run towards the fortigate backup? because my problem is that I can't run towards the backup, but if the fortigate HA is unplugged, then there is no problem

[Mark Elsen]

  - @duwijakarta  I don't have any exact info's on the fortigate HA situation; however you may find these info's useful:
                                 https://community.fortinet.com/t5/FortiGate/Technical-Tip-Aggregate-link-configuration-topologies-in-a-High/ta-p/200980
                                https://community.fortinet.com/t5/FortiGate/Technical-Tip-LACP-behavior-in-an-HA-cluster/ta-p/195163

  M.