02-06-2023 10:40 AM
Hi,
Looking for information whether or not a C9300-48U-A-UL switch can be stacked with C9300-48P?
the C9300-48U-A-UL is a UL1069 Standard compatible switch if it matters
Thanks
Solved! Go to Solution.
02-06-2023 12:04 PM
Hi,
I see. The part number you posted (C9300-48U-A-UL) is not part of the "UB" family and so, you should be able to stack it together with C9300-48P-A, because the only difference between the 2 is that one comes with UPOE (60W) and the other one is just regular POE+ (30W). My apologies.
HTH
02-06-2023 11:35 AM
Hi,
No. that is not supported:
Mixed stacking between Catalyst 9300 and Catalyst 9300X and Catalyst 9300 higher scale models (C9300-24UB, C9300-24UXB, C9300-48UB) is not supported. You cannot stack fixed uplink models (C9300L SKUs) with modular uplink models (C9300 SKUs) or other Catalyst switches, e.g. Cisco Catalyst 3850 and 3650 Series. Any combination of Catalyst 9300 models can form a stack. Separately, any combination of Catalyst 9300L models can form a stack.
link for more info:
HTH
02-06-2023 11:48 AM
Thanks, Reza,
Thanks for the link, but looks like the C9300-48U-A-UL is not from the C9300L family, it's the same family as the C9300-48P. so shouldn't they be compatible with each other?
Am I correct in my interpretation?
C9300-48P-A | Catalyst 9300 48-port 1G copper with modular uplinks, PoE+, Network Advantage |
C9300-48U-A-UL | Catalyst 9300 48-port 1G copper with modular uplinks, UPOE, Network Advantage (Compatible with UL1069 Standard*) |
02-06-2023 12:04 PM
Hi,
I see. The part number you posted (C9300-48U-A-UL) is not part of the "UB" family and so, you should be able to stack it together with C9300-48P-A, because the only difference between the 2 is that one comes with UPOE (60W) and the other one is just regular POE+ (30W). My apologies.
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide