Cisco Catalyst 2960XR and REP protocol

[sem]

Switch Cisco Catalyst 2960XR (WS-C2960XR-24TS-I, IP Lite Base) with IOS XE 15.2 (6) E, Cisco IOS Release 15.2 (4) E supports the Resilient Ethernet Protocol (REP)?

There are documents confirming this fact:

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960xr/software/15_2_6_e/configuration_guide/b_1526e_consolidated_2960xr_cg/configuring_resilient_ethernet_protocol.html

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-2_4_e/releasenotes/rn-1524e-2960x-xr.html

But there are documents that do not indicate this support:

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15_2_6_e/release_notes/rn-1526e-2960x-xr.html

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-2960-x-series-switches/data_sheet_c78-728232.html

[Mark Malone]

https://supportforums.cisco.com/t5/lan-switching-and-routing/configure-rep-on-2960xr-level-2-switch/td-p/2814418

This user has it working same switch code 15.2

[sem]

Thank you!

[sem]

Thank you!

[Leo Laohoo]

LAN Lite does NOT support REP.

[sem]

The documentation says that only on IP Lite Base and above. Correct if I'm wrong.