I am trying to find out what the most upto date IOS I can put in my Cisco Catalyst 3500 XL switch, and I'm not sure if this the newest software. I have a lab setup at my house to study for the CCNP certs and this IOS doesn't have all the commands I need, well it might but all depracated commands. Thank You in advance for your help
Switch#show version
Cisco Internetwork Operating System Software
IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)XW, RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Thu 14-Dec-00 14:26 by devgoyal
Image text-base: 0x00003000, data-base: 0x00329DF8
ROM: Bootstrap program is C3500XL boot loader
Switch uptime is 32 minutes
System returned to ROM by reload
System image file is "flash:c3500XL-c3h2s-mz-120.5-XW"
cisco WS-C3548-XL (PowerPC403) processor (revision 0x01) with 16384K/1024K bytes
of memory.
Processor board ID FAB0524M2FK, with hardware revision 0x00
Last reset from warm-reset
Processor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
48 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address:
Motherboard assembly number:
Power supply part number: 3
Motherboard serial number:
Power supply serial number:
Model revision number: A0
Motherboard revision number: B0
Model number: WS-C3548-XL-EN
System serial number: FAB0524M2FK
Configuration register is 0xF
