02-26-2008 11:08 PM - edited 03-05-2019 09:24 PM
hi
i am about to purchase a Cisco Catalyst 4506-E ,i have 7 cisco 3560 POE and 1 Cisco AP1200 to be connected via fiber to the Cisco Catalyst 4506-E
Can you please specify what items to be ordered like slots? cards? and chassis
Solved! Go to Solution.
02-27-2008 01:08 AM
hi...
4506 E is a 6 slot chassis. The following modules are required.
1. Supervisory engine (1 no.)
2. 6 port GBIC Module (2 nos.)
3. 24 port RJ45 10/100/1000 Module (1 no.)
(This is required, only if you need to
connect your servers/routers/firewall to
the 4500).
4. 2400W Power supply (2 Nos.)
5. GBIC Singlemode/Multimode(8 Nos.)
Hope this will help you. Let me know fi you require the part numbers for the items.
regards
jerril
02-27-2008 01:08 AM
hi...
4506 E is a 6 slot chassis. The following modules are required.
1. Supervisory engine (1 no.)
2. 6 port GBIC Module (2 nos.)
3. 24 port RJ45 10/100/1000 Module (1 no.)
(This is required, only if you need to
connect your servers/routers/firewall to
the 4500).
4. 2400W Power supply (2 Nos.)
5. GBIC Singlemode/Multimode(8 Nos.)
Hope this will help you. Let me know fi you require the part numbers for the items.
regards
jerril
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide