cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
390
Views
0
Helpful
1
Replies

Cisco Catalyst 9000 Stackwise Virtual Running-Config

FirmanSanjaya
Level 1
Level 1

Hi,

Does anyone know if I've configured access list and vlan in the primary switch before I configured it with stackwise virtual configuration, Is it lost or still there when the switch is reload for stackwise synchronization process with the secondary switch ?

 

Thanks in advanced

1 Accepted Solution

Accepted Solutions

pieterh
VIP
VIP

the process is similar to "adding a switch to a stack"
- the global configuration is used from the primary switch for centralized management
- the switchport configuration is kept for both switches, but interfaces on the secondary switch are renumbered

for full documentation see  Products - Cisco Catalyst 9000 Platform StackWise Virtual White Paper - Cisco

View solution in original post

1 Reply 1

pieterh
VIP
VIP

the process is similar to "adding a switch to a stack"
- the global configuration is used from the primary switch for centralized management
- the switchport configuration is kept for both switches, but interfaces on the secondary switch are renumbered

for full documentation see  Products - Cisco Catalyst 9000 Platform StackWise Virtual White Paper - Cisco

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: