Cisco Catalyst 9200L : Disable Bluetooth with command line ?

[CERKYR]

Hello,

Is it possible to disable the Bluetooth functionnality, inside the Cisco 9200L, without the web interface, but with the SSH interface ?
If yes, what is the commande line ?

Regards,

[balaji.bandi]

Issue command :

show platform hardware bluetooth

give you information, based on the port

interface Bluetooth x/x

disable

shutdown

[Reza Sharifi]

Hi,

There is a section in this link describing how to enable it. Maybe you can use the same procedure to disable it.

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9200/software/release/16-12/configuration_guide/int_hw/b_1612_int_and_hw_9200_cg/configuring_an_external_usb_bluetooth_dongle.html

Step 3

Enable Bluetooth interface using the enable command in interface configuration mode: Device# configure terminal Device(config)# interface bluetooth 0/4 Device(config-if)# enable

[CERKYR]

Hello,

I plan to check and confirm tomorrow.

Thanks a lot.

[balaji.bandi]

sure give  us your testing and inputs

[CERKYR]

Hello,

On my side, the proposal doesn't work.

I see the fonctionnality "Bluetooth" at internal web site interface (html). (an possible to disable Bluetooth here)

I just want to disable it on a SSH interface.

Regards,

[balaji.bandi]

can you post the configuration to look?

[CERKYR]

Hello,

On my side, it's not possible to copy/paste the Cisco Configuration due to Security issues.
I continue to search how to disable the Bluetooth functionnality discovered inside the graphic interface (https).

Regards,