cisco Cisco 9300-48P can be stacked with 9300-48U

[Ditter]

Hi to all,

is there the capability of stacking together 9300-48P with 9300-48U?

And if yes what happens in case you implement power stacking?  Should both have 1100WAC or the 9300-48P could go with the standard 715WAC?

I suppose it has to do with power budgeting but if you have poe devices @ 60W you should gather them together to the 9300-48U and all at & af devices to the second 9300-48P.

All of these assumptions only in the case they can be stacked together but can they?

Thanks,

Ditter.

[balaji.bandi]

yes same model possible. same IOS Code required.

refer below guide :

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9300-series-switches/white-paper-c11-741468.html

also installation guide :

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/hardware/install/b_c9300_hig/b_c9300_hig_chapter_010.html