04-25-2012 07:58 AM - edited 03-07-2019 06:20 AM
Hi everybody
I have few questions about cisco " high end " routers. First of all , what are some cisco high end routers? What roles do these routers perform in our network?
thanks and and have a nice week.
Solved! Go to Solution.
04-25-2012 08:02 AM
Cisco ASR9000. High end aggregation router (service provider world) .
Slightly smaller than the GSR, but crazy fast.
04-25-2012 09:35 AM
The ASR series routers are well-suited for Gig handoff. We use them as RPR edge routers throughout our network.
For the smaller sites, we use 1001's. For sites that require more throughput, we use the 1002 (not the 1002F) with the 5Gbps ESP. If you require higher port density, they have a 5-port Gig Shared Port Adapter (SPA).
These two things make the box pretty beastly.
Stick with 15.1(3)S2 code. The earlier versions of software would have occasional crashes and faulty logging of environmentals.
We had regular pages from them that said their inlet temp was 127 Celcius. Apparently, the router thought the room was on fire.
Ven
04-25-2012 10:28 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
CRS-1 and CRS-3 are high-end. Used for routing lots and lots of traffic. We use them for our backbone routers which can have lots of 10 gig or 40 gig ports, and even 100 gig ports. (NB: This is for a Service Provider backbone.)
Also as part that part of the network, we also use the ASR 9000 and 7609. The 7609s (with 7 x 6704 line cards with DFCs) is our low end model, which is being phased out as they no longer offer sufficient performance.
On our internal enterprise network, we consider the 7600s the high end.
04-25-2012 08:02 AM
Cisco ASR9000. High end aggregation router (service provider world) .
Slightly smaller than the GSR, but crazy fast.
04-25-2012 09:35 AM
The ASR series routers are well-suited for Gig handoff. We use them as RPR edge routers throughout our network.
For the smaller sites, we use 1001's. For sites that require more throughput, we use the 1002 (not the 1002F) with the 5Gbps ESP. If you require higher port density, they have a 5-port Gig Shared Port Adapter (SPA).
These two things make the box pretty beastly.
Stick with 15.1(3)S2 code. The earlier versions of software would have occasional crashes and faulty logging of environmentals.
We had regular pages from them that said their inlet temp was 127 Celcius. Apparently, the router thought the room was on fire.
Ven
04-25-2012 10:28 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
CRS-1 and CRS-3 are high-end. Used for routing lots and lots of traffic. We use them for our backbone routers which can have lots of 10 gig or 40 gig ports, and even 100 gig ports. (NB: This is for a Service Provider backbone.)
Also as part that part of the network, we also use the ASR 9000 and 7609. The 7609s (with 7 x 6704 line cards with DFCs) is our low end model, which is being phased out as they no longer offer sufficient performance.
On our internal enterprise network, we consider the 7600s the high end.
04-25-2012 03:21 PM
I'd like to call the CRS family as the "carrier-grade router switches" because only large (to very large) carriers can afford the line cards.
GSR are also "high end" routers and switches.
ASR are not really "high end", however, if you want a chassis that can push 1 Gbps, then ASR is the way to go.
The 7200VXR is also another example of the "high end".
04-25-2012 05:32 PM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
ASR are not really "high end", however, if you want a chassis that can push 1 Gbps, then ASR is the way to go.
I'm sure you're thinking the ASR 1000 series. The ASR 9000 series is rather "high end".
Cisco notes:
PS:
The 6500 Series "Switch", which also routes, now offers up to 2Tbps per chassis
The ASR 1000 series offers up to 40 Gbps
The 7200 series offers up to 2 Mpps (about one to several Gbps).
04-25-2012 08:13 PM
I'm sure you're thinking the ASR 1000 series.
You're absolutely right Joseph. Mea culpa.
The ASR 1K and the ASR 800 series is not, in my opinion, classified as a "high end" router.
04-26-2012 05:31 AM
Granted folks. However, since I don't work for an ISP, I doubt I'll ever even see a carrier-grade box.
In my little world, the ASR 1002 is about as big as I'll see for a LONG time.
Famous last words right?
I still remember thinking aggregating 56k x 4 on an AGS+ was big time.
Ven
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide