Cisco IE-1000-4P2S-LM: Questions

[nav_proTYPE]

Hi,

I was wondering if anyone could tell me whether or not the Cisco IE-1000 series switch supports configuration via CLI. So far I have been unable to find supporting information that demonstrates that this is possible. Can someone confirm? 

Additionally, is it possible to change (or spoof) the MAC address for this device? I need to change the MAC on the SFP ports. 

Thank you,

[balaji.bandi]

User access to the switch through Telnet/SSH/DM can be controlled by TACACS+/RADIUS Authentication/Authorization.

it has ssh connection, for the SLA, not sure what MAc address you like to change ?

[nav_proTYPE]

Thanks for the prompt response, balaji. So, I tried to ssh into the device after I completed the express config., but it doesn't appear to allow me. Also, I want to change the MAC address on the uplink interfaces, the 2x SFP ports. These two ports will be connected to two different systems that has switchport port-security enabled on them. I will not be present during the install, so disabling the port-security isn't an option atm, which is why I need to spoof the address to match an already approved mac address. Do you know if this is possible? 

[balaji.bandi]

need to check the latest code for SSH to work :

https://www.cisco.com/c/en/us/td/docs/switches/lan/cisco_ie1000/release_notes/b_ie1k_1-7rn.html