cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
298
Views
0
Helpful
2
Replies

Cisco IOS base process

Rizwan Khan
Beginner
Beginner

Hello everyone,

I am facing an issue and want your help, i am using cisco 6509 switch with IOS 12.2(33)SXI8a. The cpu usage remains sound on 6%. The moment i configure it for AAA the cpu start shooting to 50%. I have verified the graphs of each switch port and no traffic is seen on it. when i issue show process cpu command the process ios-base is taking almost all the cpu. Can anyone help me out on it.i am attaching the AAA commands which i issue.

aaa group server tacacs+ AAA-Servers

server 10.10.7.32

server 192.168.150.106

exit

Thanks in advance.

2 Replies 2

Marvin Rhoads
Hall of Fame
Hall of Fame

Your command set there is pretty straightforward. I don't see a specific bug associated with that release but the TAC would probably advise an upgrade. Your release is from December 2011 and 12.2(33)SXI12 is current (reference).

Rizwan Khan
Beginner
Beginner

Thanks Marvin.
What I observed is that even when I issue show running config the cpu shoots to 50 plus. Only when the command is issued via ssh connection. If I access the switch from console the cpu stays normal around 10 percent.
Anyone having the same issue please help.


Sent from Cisco Technical Support Android App

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: