Cisco IOS Image Recovery on a Cisco 3750v2

[enrique.copeland]

Good morning. I was upgrading the IOS on a Cisco 3750v2, and during the process , an individual tried to connect stacking cables which terminated the process and an automatic reload was initiated. I'm trying to do a recovery through xmodem, but the process seems to be different with this model of switch. There is no load_helper command on this switch. Can you provide me with the steps to do an image recovery with the Cisco 3750v2 switches? Thanks.

[Madhukrishnan Gopinathan Nair]

Hello Enrque,

What happen?  You don't have any IOS file in flash now?  If you dont have any IOS file, try uploading via XMODEM. I believe you don't need to apply load_helper if you are just loading via xmodem. Try loading it and boot the image 

witch: boot flash:<Image>

Hope this helps.

Thanks,

Madhu.

[Madhukrishnan Gopinathan Nair]

http://www.cisco.com/c/en/us/support/docs/switches/catalyst-2950-series-switches/41845-192.html