Cisco LocalDirector

[dappel]

I am doing some switchport tuning using spanning-tree bpdu guard and loop guard.

Is the Cisco LocalDirector considered a switch where I would need to use loop guard? or would I need to configure the switchport with bpdu-guad?

[hadbou]

You have to find out which one is best for your network. Below is link to Provide with sample config and Reference documents and design guides

http://www.cisco.com/en/US/products/hw/contnetw/ps1894/products_installation_guide_book09186a008007e98e.html

http://www.qorbit.net/documents/cisco-local-director-abstract.htm