Hi ,
i have cisco MDS 9216i that give checksum halted
i have below :
TNNASFCSW02# show system health statistics
Test statistics for module 1
------------------------------------------------------------------------------
Test Name State Frequency Run Pass Fail CFail Errs
------------------------------------------------------------------------------
InBand Running 5s 2044095 2044095 0 0 0
Bootflash Running 10s 1022083 1022083 0 0 0
EOBC Running 5s 2044095 2044095 0 0 0
Management Port Running 5s 2044095 2044095 0 0 0
Loopback Running 5s 2044095 2044095 0 0 0
------------------------------------------------------------------------------
Test statistics for module 2
------------------------------------------------------------------------------
Test Name State Frequency Run Pass Fail CFail Errs
------------------------------------------------------------------------------
Bootflash Running 10s 1022130 1022130 0 0 0
EOBC Running 5s 2044262 2044262 0 0 0
Loopback Running 5s 2044082 2044082 0 0 0
CF checksum Halted 7d 0 0 0 0 0
CF re-flash Halted 30d 0 0 0 0 0
------------------------------------------------------------------------------
TNNASFCSW02# sh version
Cisco Storage Area Networking Operating System (SAN-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2008, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software may be covered under the GNU Public
License or the GNU Lesser General Public License. A copy of
each such license is available at
http://www.gnu.org/licenses/gpl.html and
http://www.gnu.org/licenses/lgpl.html
Software
BIOS: version 1.1.0
loader: version 1.2(2)
kickstart: version 3.3(1a)
system: version 3.3(1a)
BIOS compile time: 10/24/03
kickstart image file is: bootflash:/m9200-ek9-kickstart-mz.3.3.1a.bin
kickstart compile time: 4/9/2008 17:00:00 [04/19/2008 14:24:00]
system image file is: bootflash:/m9200-ek9-mz.3.3.1a.bin
system compile time: 4/9/2008 17:00:00 [04/19/2008 14:45:34]
Hardware
cisco MDS 9216i ("2x1GE IPS, 14x1/2Gbps FC/Supervisor")
Intel(R) Pentium(R) III CPU with 963828 kB of memory.
Processor Board ID JAB092502U2
bootflash: 250368 kB
slot0: 0 kB
TNNASFCSW02 kernel uptime is 118 days 7 hours 32 minute(s) 31 second(s)
Last reset
Reason: Unknown
System version: 3.3(1a)
Service:
================================================
as we see , i have the checksum halted :
CF checksum Halted 7d 0 0 0 0 0
CF re-flash Halted 30d 0 0 0 0 0
what should i do in this case ?
change the flash container ?
or just upgraded the software ?
thanks